Home > Die & Mould > Plastic Mould > News



fhw moulds GmbH


Company \| News \| Products \| Contact Us

Venting the extrusion mould

2/28/2012

Extrusion mould specialist fhw-moulds GmbH of Bottrop/Germany presents a special solution for removing air from extrusion moulds and proves its innovative strength. This brand new, optimized product is perfectly adapted to blow moulders' requirements for improved cycle times.

As the mould closes around the parison and is inflated and pressed to the cavity wall by air blown into it, air is trapped between the parison and the two mould halves. This trapped air must be removed. In order to expedite this venting process, conventional moulds are often equipped with vents at the parting line for expelling any trapped air, sometimes with the help of vacuum. The downside of this method is the fact that air can only be removed locally and the introduction of a vacuum leaves small marks on the finished part.

Specialist fhw-moulds has developed a new solution for this problem: the extrusion mould for a 20 litre jerry can is now vented in all four corners of the mould and vacuum can be used to increase the ventilation effect. The vent is cut across the entire height of the mould corner so as to eliminate the occurrence of marks on the finished part. This way, entrapped air can be removed quickly and effectively.

During extrusion blow moulding, cycle times are highly dependent on mould cooling times. The new mould design with corner venting allows significant cuts in cycle times. "Thanks to optimized cycle times, the additional costs for this special mould have a very short payback time," Jean Ingenbrand, Managing Director of fhw-moulds points out. An additional benefit of this solution is that exchangeable corners can accommodate different designs of hollow plastic products, which translates into more versatility and cost-efficiency for blow moulders.

Website: www.fhw-moulds.de

DME to Display Wide Range of Engineered Hot Runner Solutions at NPE 2/21/2012

NEW "Request For Quotation" online form added for Melt Filtration and Machine nozzles 11/17/2011

Hagen Award for Kautex Maschinenbau 11/17/2011

SYNVENTIVE eGate® - A HIGH PERFORMANCE ELECTRIC VALVE GATE HOT RUNNER SYSTEM 11/15/2011

IML with labels printed on both sides for the perfect decoration of drinking cups 10/21/2011

NEW "Request For Quotation" online form added for Melt Filtration and Machine nozzles 10/19/2011

Southwest Venture Plastics Adding Third Molding Line To Support New Customers and Markets 9/20/2011

Venture Plastics Improves Molding Quality, Productivity And Profitability Through Decoupled Molding 7/7/2011

Plastic Mould Exhibitions
	Expoplast Peru Lima 2026 8/19/2026 - 8/22/2026 Lima, Peru
	Taipei Smart Mold & Die 2026 8/19/2026 - 8/22/2026 Taipei, Taiwan
	ANIPAC Convention 2026 9/1/2026 - 9/4/2026 TBD, Mexico
	Plastic Product Decorating Summit 2026 9/1/2026 - 9/3/2026 Houston TX, United States
	MacTech Saudi Arabia 2026 9/7/2026 - 9/9/2026 Jeddah, Saudi Arabia
More Trade Shows