战狼6免费观看高清完整版,黏黏糊糊的你第1集,侄女的开发日记免费动漫观看

Home > Metals & Materials > Composite & Adhesives > Crestapol® 1212



Scott Bader Company Ltd.


Company \| Products \| News \| Contact Us

Crestapol® 1212

Crestapol 1212 is a tough, low viscosity resin with a rapid cure, which can be highly filled with selected grades of alumina trihydrate (ATH). Highly filling this resin with ATH allows a very high level of fire & smoke performance (Epiradiateur NFF 16-101, NFP 92-501, M1, F0). It is designed for closed mould applications, including vacuum infusion with suitable reinforcements and pultrusion processes. (Separate Crestapol Pultrusion and Closed Mould guides are available).

Formulation

This resin should be allowed to attain workshop temperature (18ºC - 20ºC) before use. It requires the addition of a catalyst and accelerators to start the curing reaction. Accelerators and any additives should be mixed into the resin prior to any filler addition. Catalyst is the final component to be added immediately prior to use to begin the polymerising reaction.

N.B. Catalyst and accelerators should not be mixed directly together, since they react with explosive violence.

For Closed mould applications, the recommended catalyst is Perkadox CH50X and the recommended accelerator is dimethyl aniline (DMA), Dimethyl paratoluidine (DMPT) can also be used in addition to DMA if required. The geltime can be extended using commercially available inhibitors such as NLC 10 from Akzo.

For Pultrusion applications please refer to the Crestapol Pultrusion guide or seek assistance from from our Technical Services Department for formulating advice.

Related Products

wedge recording room absorbing foam
greensound acoustics material company
greesound Homework 2" Wedge foam is the best choice to improve stereo imaging, and fix problems with high frequencies. Because of the deep-cut wedge ...

PAM-FORM
ESI Group
PAM-FORM enables the realistic and predictive simulation of dry textiles or prepregs forming processes. The software was developed through industrial ...

Multi-purpose structural bonding
Aderis Technologies
Suitable for bonding small areas and for applying fine bond lines, adhesives in the ADERIS™ 8041, 8042 and 8043 ranges meet the requirements for ...

Composite Processing
RocTool France
Main advantages for Composite Processing Quick Cycle Time, Ideal for Large Production Low Temperature & High Temperature up to 400ºC Easy to ...

PEKK
VELOX GmbH
PEKK - High performance materials, unfilled or reinforced (glass or carbon fiber), displaying superior chemical resistance, excellent themal stability ...

Composite & Adhesives Exhibitions
	CANCOM 2026 8/10/2026 - 8/14/2026 Vancouver, Canada
	International Materials Research Congress 2026 8/16/2026 - 8/20/2026 Cancun, Mexico
	Feiplar Composites & Feipur 2026 8/25/2026 - 8/27/2026 Sao Paulo, Brazil
	RISE 2026 8/25/2026 - 8/26/2026 Raleigh NC, United States
	Sol-Gel 2026 International Conference 8/31/2026 - 9/4/2026 Lisbon, Portugal
More Trade Shows