荒野之行1986满天星,水手服饲养,和讨厌的部长一起去出差旅的电影叫什么

Home > Die & Mould > Plastic Mould > Special nozzles



GÜNTHER Heisskanaltechnik GmbH


Company \| Products \| News \| Contact Us

Special nozzles

Multi-tip nozzlesg
The hot-runner nozzles for side gating give you the ideal scope in designing your hot-runner systems. Special attention was paid therefore to cost effectiveness and simple maintenance, for example hot-runner nozzle OktaFlow? with undivided inserts! Optional: Nozzle tips made of wear protection for processing filled materials. We shall be happy to provide an as-fitted drawing for your application.

26LHT hot-runner nozzle with up to 4 tips for side gating under 90? without cold slugs, in combination with a manifold. The individual nozzle tips cannot be influenced directly. With divided inserts!

Hot-runner nozzle OktaFlow? type OMT with 8 tips for side multi-tip gating (under 90?) without cold slugs. Optimum temperature developement thanks to heating in the nozzle tip area. Cost-efficient, that undivided inserts. Hot-runner nozzle OktaFlow? can be used as a single nozzle with heated adaptor.

Hot-runner nozzle PektaFlow? type PLT with up to 24 tips for side multi-tip gating (under 90?) without cold slugs. Optimum temperature developement thanks to heating in the nozzle tip area. To require divided inserts. Hot-runner nozzle PektaFlow can be used as a single nozzle with heated adaptor.

Verticale gating
The hot-runner nozzles for the vertical gating were developed to give you the optimum scope in designing your hot-runner systems.

The 26ZET single nozzle with up to 4 tips allows high quantities of cavities while avoiding complex control engineering. The individual nozzle tips cannot be influenced directly.

Accordingly the SMHT/DMHT nozzle series is perfect for the multi-tip gating of small parts and that with close cavity spacing. However high the requirements are in terms of gate position, tear-off quality and shot weight, the SMHT/DMHT nozzle line proves to be flexible and extremely adaptable to complex demands. Another advantage for your applications: the temperature of each tip on the SMHT/DMHT nozzles can be regulated separately. The injection is direct and is also suitable for the internal injection of moulded parts. The nozzles allow a gentle flow of melt and permit the use of compact multi-cavity moulds with close cavity spacing.

An extended nozzle tip is recommended for injection onto products with different levels of height and for sprue-free injection in confined spaces.

DIN EN ISO 9001:2008 certification.

Related Products

Needle valve
GÜNTHER Heisskanaltechnik GmbH
Valve-gate systems The nozzle types listed in this chapter cover a wide range of uses. The modular nozzle design allows a rapid replacement of components ...

Hot runner nozzles
GÜNTHER Heisskanaltechnik GmbH
Hot runner nozzles Standard hot runner nozzles for direct gating from 0.0189 to 5 kg per nozzle. If required, the modular nozzle design allows ...

Plastic Mould Exhibitions
	Expoplast Peru Lima 2026 8/19/2026 - 8/22/2026 Lima, Peru
	Taipei Smart Mold & Die 2026 8/19/2026 - 8/22/2026 Taipei, Taiwan
	ANIPAC Convention 2026 9/1/2026 - 9/4/2026 TBD, Mexico
	Plastic Product Decorating Summit 2026 9/1/2026 - 9/3/2026 Houston TX, United States
	MacTech Saudi Arabia 2026 9/7/2026 - 9/9/2026 Jeddah, Saudi Arabia
More Trade Shows

_{<wbr id="jbrhf"></wbr>}